HomePage : HardWare : BatteryPacks : BatteryBooster


The Battery Booster Pack is basically a battery cage for the Newton that is always outside. It was made by Apple for the MP1x0 series, holds 8aa batteries and are hard to find anymore. The idea is if you are running low on power, you plug this into your Newton's power port and run for many hours that way. If you are using alkaline batteries it would work fine. I don't know how well it would work if you have a rechargeable pack in the Newton as I would think it will try to charge the pack. So I would recommend pulling the pack inside the Newton before you plug in the battery booster pack. Since the voltage is the same with a MP200 as MP1x0 it should work, however I would make sure the rechargeable battery was removed before plugging it in. Just to be safe.

(By ???)


Apple Newton Battery Booster Pack

Safety

Apple Computer, Inc.

20525 Mariani Avenue

Cupertino, California 95014-6299

(408) 996-1010

TLX 171-576


ZM030-4351-A

(From the original manual by DJ Vollkasko.)


HomePage : HardWare : BatteryPacks : BatteryBooster